|
|
Build Your Online Product Catalogs?
| Product Name: |
Pultruded Fiberglass Shapes
|
| Supply Ability: |
5000mt/year |
| Related proudcts |
frp, grp tank, pultruded fiberglass, |
| Specifications |
negotiation |
| Price Term: |
FOB, CIF |
| Port of loading: |
tianjin |
| Minimum Order |
1 |
| Unit Price: |
negotiation |
|
Pultruded Fiberglass Shapes
Cable tray is assembled by pultruded GRP/FRP profiles; suitable for electrical cable, control cables, lightening cable and fittings. There are fiberglass pipe, fiberglass tank, fiberglass tube and vessel.
Advantage:
1.Long service life ( normal design life is 20 years)
2.Convenient installation, and low cost (1/4 SG of carbon steel, no need of fire during construction; length per piece can be 8 m, or more.)
3.Easy to cut, no need of maintenance
Application:
KQJ series cable tray is suitable for voltage below 10 kV electrical cables, control cable, and lightening fitting cables of below 10 kV and the lay out for indoor, outdoor, aerial, channel for cable and tunnel.
Structural features:
KQJ serial cable trays have the features that: widely used, high strength, reasonable structure, low cost, easy for construction, flexible fittings, nice-looking appearance, which make expansion, rebuilding, maintenance much easier.
Installation:
The installation of KQJ series cable tray can be per the local conditions can be laid according to the process requirements, such as plumbing, floor, hoisting under the beam, indoor and outdoor wall, tunnel, cable trench side wall mounted, but also on the open column.
When height of groove of cable tray is 50,100 mm, 6 connection holes for each end; when height of groove of cable tray is 150,200 mm, 12 connection holes for each end.
Support ***cing: it shall be less than or equal load curve, allowable load and support ***n.
Width: when we are electing the width of cable tray, we should leave enough ***re ***ce for new cables in the future.
Separated lying: when there are less power cables and control cables, they can be installed in the same cable tray, but there should be a separation plate between the power cable and control cable.
Fixing of cables: when the cable trays are horizontal laid, the connection point shall be in the position of 1 / 4, horizontal cable shall be fixed every 2 meters, the vertical cable trays shall be fixed eve |
| Company: |
Hebei FUSHENG FRP CO.,LTD
|
| Contact: |
Ms. Betty Wang |
| Address: |
NO. 369 YongXingDong Road Jizhou City Hebei Province China. |
| Postcode: |
53200 |
| Tel: |
03188630363 |
| Fax: |
86-318-8619977 |
| E-mail: |
|
|
|
|
Home
